1. VMA-A0026 Avenger 60 ARF Aerobatic Pattern
1.1. VMA-A0026 Avenger 60 ARF Aerobatic Pattern - READ ME FIRST
READ ME FIRST - for Models with VCOTE Covering
The Read Me First for models covered with VCOTE applies to this product and is available at:
 
 
The Read Me First will open in a second window. Please review it, print it or email it using the icons located near the top right of the Read Me First page (mouse over each icon for feedback about what it does). When you are finished, close the Read Me First window and continue browing here.
1.2. VMA-A0026 Avenger 60 ARF Aerobatic Pattern - Additional Information

In general "Additional" Information is:

  • In addition to that found in other documentation related to this product,
  • Often reflects feedback &/or questions from users of the product.

Subject to the Conditions of Use, please review the attachments and related articles listed below.

COPYRIGHT
Copyright Richmond RC Supply Ltd. All rights reserved.
 
1.2.1. VMA-A0026 Avenger 60 ARF Aerobatic Pattern - Rear Exhaust & Tuned Pipe
Question: I have a VMA-A0026 Avenger 60 ARF Aerobatic Pattern. Can I use an engine with a rear exhaust and a tuned pipe?

Answer: The VMA-A0026 Avenger 60 ARF Aerobatic Pattern was designed assuming a side exhaust and standard muffler. You will likely need to make many changes to the factory engine compartment and mount to accomodate a rear exhaust engine and depending on the engine this may not be possible at all.
 
Tuned pipes that are exposed and attach to the side of the fuselage may be possible however the Avenger was not designed with tuned pipes in mind.
 
1.3. VMA-A0026 Avenger 60 ARF Aerobatic Pattern - Assembly & Operations Manual in PDF format