VMAR Power Module Sets are factory designed for each VMAR Electric Model and contain the firewall(s), electric motor(s) and electronic speed controls(s) (ESC) for the applicable model. A VMAX Power Module Set typically consists of the following components: - Laser cut wood power module firewall.
- This may also be supplied with the model (in a parts bag)
- Brushless Motor (#VMM-111B18VM)
- With four (4) 3mm socket head bolts and 4 flat washers fitted for shipping.
- Propellor Mounting Hardware.
- One (1) 3mm security lock nut is fitted on the threaded motor shaft for shipping.
- Three (3) 3mm nuts and two (2) #6 flat washers are supplied in a parts bag.
- Electronic Speed Control ("ESC") (#VMC-120B15VC).
- Red, White & Black three (3) wire lead set attached to ESC for connection to Brushless Motor.
- Red (+), Black (-) two (2) wire lead set attached to ESC for DC power input.
- Two (1 Red, 1 Blue) crimp on female bullet connectors for power battery leads.
- RC servo plug on Red, White, Black three (3) wire set for connection to RC receiver throttle channel.
- Four zip straps.
- READ ME FIRST documentation.
Power Module Sets for Multi-Motor Models: - Power Module Sets for multi-motor models will contain multiple firewalls, motors and speed controls as required to power the model.
- For each ESC in the Power Module Set we also include 1 Red and 1 Blue female crimp on bullet connector for use with user supplied power leads.
- For each motor in the Power Module Set we also include propeller mounting hardware.
VMAR Power Module Sets do NOT include:
- Wiring or connectors other than the leads attached to motor and attached to the electronic speed control and the red and black female bullet connectors noted above.
- Propeller
- Li Po Battery Pack
- Servos
These components are NOT included in the Power Module Set and will be needed to complete your model. If you do not already have these items, they will need to be obtained separately.
|