This VMAR Wiring Harness Set (WHS) contains the following
- Aileron Wiring Harness (WHA) to connect the two aileron servos in the wings to the aileron channel of the receiver in the fuselage. Total Length = approx 15 in. (380mm). Length from aileron channel connector to Y = approx 4 in. (102 mm)
- (Note: The aileron wiring harness does NOT provide for flaperon operation using a computer radio and two discrete receiver channels. VMAR models utilizing two aileron servos will usually support computer radio flaperon functionality in conjunction with the aileron wiring harness if additional aileron extensions are purchased in addition to the aileron wiring harness included with the wiring harness set).
- Throttle Wiring Harness (WHT) to connect two Electronic Speed Controls (ESC) to the throttle channel of the receiver in the fuselage. Total Length = approx 13 in. (330mm). Length from throttle channel connector to Y = approx 7 in. (178 mm)
- Power Wiring Harness (WHP) to provide Positive (+) and Negative (-) power to two motors from a single battery (fused in line). Total Length = approx 22.5 in. (570mm). Length from battery connector to Y = approx 9.25 in. (235 mm)
This VMAR Wiring Harness Set also contains:
- Elevator Wiring Harness (WHE) to connect the elevator servo located near the tail to the elevator channel of the receiver in the fuselage. Total Length = approx 23.5 in. (597 mm). Length from elevator channel connector to junction = approx 7 in. (178 mm)
- Rudder & Steering Wiring Harness (WHR) to connect the rudder servo located near the tail and the nose wheel steering servo to the rudder channel of the receiver in the fuselage. Total Length = approx 23.5 in. (597 mm). Length from rudder channel connector to Y = approx 7 in. (178 mm).
-
End User Wiring Labels
|