A screw driver and a pair of pliers is about all you need to install most VMAX Power Modules & VMAX Power Packs.
For those looking to make things go a bit faster and a bit easier here are some tools that help with the installation:
- Medium Phillips (cross head) screw driver. Regular Length. A short stubby length may also come in handy
- A 7/32 in. "deep" socket for the 3mm nuts on the 4 mounting bolts. The 3mm nuts are used for most of our smaller electric ARF's.
- If you need to ream out (drill) any mounting bolt holes in the power module firewalls, a 9/64" drill bit works well. This allows slightly easier installation of the power module firewall onto the fuselage 3mm stud bolts and/or the slightly easier installation of the motor mount bolts (usually factory installed so not likely necessary in the field).
|