1. Power Supply - #VME-TH12V6AR - Output 12 VDC 6 Amps - READ ME FIRST
 
BEFORE PROCEEDING
TO ASSEMBLE OR
OPERATE THIS PRODUCT
 
PLEASE
READ ME FIRST
          
PLEASE
READ ME FIRST
 
BEFORE PROCEEDING
TO ASSEMBLE OR
OPERATE THIS PRODUCT
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
LIABILITY DISCLAIMER & COPYRIGHT NOTICE

LIABILITY DISCLAIMER

The authors and/or suppliers and/or disseminaters of this information and/or product expressly disclaim any warranties or representations, either expressed or implied, including but not limited to implied warranties of fitness, accuracy, timeliness or applicability of the information and/or product provided here. In no event will the authors and/or suppliers and/or disseminaters of this information and/or product have any obligation arising from contract or tort, for loss of revenue or profit, or for indirect, special, incidental, consequential or other damages of any sort arising from this information and/or product. In using this information and/or product, the user accepts all responsibility for and all liability associated with such use.

PROCEEDING WITH THE USE OF THIS INFORMATION AND/OR PRODUCT INDICATES AGREEMENT WITH AND ACCEPTANCE OF THE LIABILITY DISCLAIMER.
 
1.1. Think Safety
Power supplies, battery chargers, batteries, motors and related accessories, tools and equipment can be hazardous if improperly used. Be cautious and follow all safety recommendations when using this product. Keep hands, tools, clothing, liquids and all foreign objects and flammables well clear of equipment prior to and during operations. Check and double check all electrical connections before operating.  
 
WARNING - FIRE RISK
 
If this product or any wire, cable, adapter or other device to which it is connected Overheats, Smokes, Smells or Swells then IMMEDIATELY UNPLUG all connections & MOVE ALL COMPONENTS to a Safe Outdoor Location.
 
Do NOT Overload, Short Circuit, Drop, Mechanically Damage or Immerse 

Do NOT connect or operate Near Flammable Materials.

Do NOT operate inside an Automobile or other Vehicle.

Do NOT operate when Hot.

Do NOT operate outdoors or in a wet environment.
 
Ensure that devices to which this product is connected have compatible voltage and current requirements.   
 
UNPLUG WHEN UNATTENDED
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.2. Power Supply - VMAX #VME-TH12V6AR - Introduction
Before proceeding please read the Overview and check off the components provided against the Contents list below. Leave the components in their packaging for now. Do not remove a component from it's packaging until it is needed.  
 
Power Supplies
Although there are a wide variety of different power supplies, in our applications, power supplies typically convert alternating current (AC) power (from the "wall") to direct current (DC) power that is in turn then used by a device such as a battery charger.
 
The output voltage and output current is important when selecting a power supply. If your battery charger (or other device) requires 12 Volts of Direct Current (VDC) as an input then you must choose a power supply that provides 12 VDC output. The output current rating of the power supply is also important. If your battery charger (or other device) requires 12 VDC at 2 Amps you must choose a 12 VDC power supply that is rated at (can supply) 2 Amps or more.
 
A power supply must be capable of providing the correct voltage for your device and it must be capable of providing at least the current that the device requires. A battery charger that requires 12 VDC at 2 Amps will work fine with a power supply rated for 12 VDC at 5 Amps but will not work with a 12 VDC power supply that is rated capable of providing 1 Amp of current.
 
Never overload a power supply or under power a device. You run the risk of damaging the power supply and the device.
 
Power Supply - VMAX #VME-TH12V6AR - Output 12 VDC 6 Amps
The VMAX #VME-TH12V6AR power supply accepts 110-240VAC input and provides 12 VDC output and is rated at up to 6 Amps.
 
This output rating of 12 VDC at 6 Amps is ideal for many Li PO battery chargers such as the VME-LPBC10 and the VME-MFBC808B.
 
Please consult the READ ME FIRST document and Operations Manual of your battery charger or device to ensure that it is compatible with the #VME-TH12V6AR power supply.  
 
 
 
1.3. Power Supply - VMAX #VME-TH12V6AR - Contents
This VMAX Power Supply  (#VME-TH12V6AR) consists of the following:
  • The power supply itself.
  • Detachable AC input cord. This is supplied with a wall plug for North American style 110 VAC service.
    • For areas outside North America, please see your local supplier for a compatible AC input cord and plug.
  • Permanently attached output cord with DC output barrel connector.  
    • The barrel connector is compatible with VMAX battery chargers including #VME-LPBC10 and #VME-MFBC808B.
  • Documentation.

 

1.4. Power Supply - VMAX #VME-TH12V6AR - Installation Instructions
Consult any labels carefully, particularly any WARNING labels. The labels are largely self explanatory. Reading the labels will save you a great deal of time and help prevent damage to your equipment.
 
Plug the AC input cord into the power supply.
 
 
1.5. Power Supply - VMAX #VME-TH12V6AR - Operating

Powering Up - Turning On

A) Consult any labels carefully, particularly any WARNING labels. The labels are largely self explanatory. Paying attention to the labels will help prevent accidents and damage to your equipment.

B) Consult the documentation that came with your battery charger or device. Ensure you know how to turn it on and off and what to watch for in the way of indicator lights etc.

C) Plug the AC input cord into your AC supply (wall) outlet. 

  • A small green light on the front face of the power supply will light up in a few seconds.

D) Connect the DC output cord to your battery charger or device.

E) Turn on the device.

STAY ALERT FOR OVERHEATING, SMELLS, SMOKE OR OTHER SIGNS OF TROUBLE. UNPLUG ALL CONNECTIONS IMMEDIATELY IF THE POWER SUPPLY OR ANY CORD OR DEVICE OVERHEATS, SMELLS, SMOKES, SPARKS OR MAKES ANY UNEXPECTED NOISE OR EMISSION.
 
 
Powering Down - Turning Off.

UNPLUG WHEN UNATTENDED.
A) Unplug any downstream devices such as a battery charger first.

B) Unplug the AC input cord last.

C) The small green light on the front face of the power supply may stay lighted for up to 1 minute.

 
 
 
 
 
 

1.6. Power Supply - VMAX #VME-TH12V6AR - No No's & Must Do's
Do NOT OPERATE NEAR FLAMMABLE MATERIALS.  Do not operate near flammable liquids or gases, on or near a carpet or any flammable surface.

Do NOT OPERATE inside an automobile or other vehicle. If using a cigarette lighter adapter or connecting to automobile power ensure that the cord is long enough to connect to the power supply located outside and away from the vehicle.

Do NOT OPERATE WHEN POWER SUPPLY IS HOT. If the power supply is hot to the touch, understand why it’s hot. Check your connections. If the power supply and anything it is connected to appears to be functioning properly the power supply may be overloaded by devices to which it is connected. Reduce the load.

CONNECT TO DEVICES HAVING COMPATIBLE VOLTAGE & CURRENT REQUIREMENTS. Ensure that the input and output voltage of your power supply is compatible with the line supply and connected devices. Ensure that external devices do not overload the power supply with more current than it can supply.

DO NOT OPERATE OUTDOORS or in a WET ENVIRONMENT. This power supply is intended for indoor operation only. It is not water or weather proof.

ALWAYS UNPLUG WHEN UNATTENDED. Do not leave your power supply connected to anything when unattended. Nothing!

 

1.7. Support

On Line, eMail, Fax, Phone, Mail

We offer the Best in Support Services.
We back up our products and our customers with the best support services available. From our industry leading Knowledge Base to information about your Shipment, we've got you covered!
 
To access our Support Services please:
Your Choice of Support Services that Work for You: 
1.7.1. Contact Us

For Sales and other Inquiries  

Support - Contact Us - Reach our Sales Department by eMail, Fax, Phone or Mail

Technical Inquiries:

Please review the information provided in our Knowledge Base. After checking our Knowledge Base, if you need further assistance please use our Submit A Question service to get a response within 2 Business Days.

 

Sales Inquiries: 

Please note that our Sales Department personnel are trained and dedicated to:

  • Helping you with non-technical pre-purchase questions,
  • Helping you place your order,
  • Pointing out any sales, combos or specials that you may wish to consider,
  • Inputting your order to our computer system so that it ships out as accurately and quickly as possible... usually the same day,  
  • Resolving any invoicing problems, and
  • Helping to sort out any missing shipment or shipment damage issues.
Their depth of technical knowledge is about on par with what is shown in our printed sales literature. In most cases, they are working from the same printed advertisements or content from our web site that you are. Asking sales personnel to confirm the size, color and availability of a product is well within their capabilities. However, asking detailed questions about technical issues is not.

 

Buy our Products: 
  • From a Retailer
    • Please support your local retailer.    
  • On Line 24x7x365... if your favorite Retailer does not have what you are looking for, please visit one of our On-Line Stores. 
      • For Radio Control,
      • For ZAP Brand CA, cyanoacyrlates, superglue & epoxies
    • www.supplystore.com
      • Supplying ZAP Brand CA, cyanoacyrlates, superglue, epoxies, related accessories and more to End Users & Consumers in the Building Construction, Repair & Maintenance Trades. Also Fine Woodworkers, Stagecraft Artisans, Professional Detailers, Sportsmen & Scale Model Builders.
    • www.zapglue.ca
      • Supplying ZAP Brand CA, cyanoacrylates, superglue, epoxies and related accessories to End Users & Consumers in the Industrial, Manufacturing, Assembly and Laboratory sectors.
  • Order By Fax 24x7x365
    • 604-940-1063
  • Order By Phone M-F 11am-4pm Pacific Time
    • Order Desk 604-940-1066    

 

For All Other Inquiries... please consult the following resources:

  • After reviewing our On Line resources, if you require additional assistance please contact us by eMail, fax, phone or mail as follows:

    • Ask a Question
    • eMail 
    • Fax
      • 604-940-1063
    • Phone
      • 604-940-1066
    • Mail
      • Richmond RC Supply Ltd, #114 - 7350 72nd Street, Delta, BC, V4G-1H9
        • Mail & printed correspondence only.                
        • We are not able to accomodate personal site visits or drop-offs/pick-ups at this location.
        • Please note that all inbound Shipments require pre-Authorization in advance.
        • Unauthorized inbound shipments will be refused.        

 
1.8. Warranty

This product is warrantied to the original buyer to be free of manufacturing defects for a period of 6 months from date of purchase.

Problems caused by alteration, normal wear and tear, physical damage, abuse, improper use, failure to comply with the setup and operating instructions, customer disassembly or damage caused by defective batteries or damage caused by the use of other accessories are not covered by this warranty.

All warranty returns MUST be accompanied by an RMA number and a dated sales receipt from an authorized VMAX re-seller and the original VMAX packaging along with all of the adapters and connectors supplied with this product.

All returns must be SHIPPED PREPAID to the VMAX Service Center in your market area.
 
See "Support" for information about Warranty Claims.
 
1.9. Keep Up to Date

Check Frequently for Updates

Support - Stay Current - Check Frequently for Updated &/or Additional Information
This information is subject to change without notice. When viewing this information in a printed form the printing date will be visible in the lower right corner. Check frequently for updates &/or Additional Information.at www.richmondrc.com, > Enter the Site, > Support Services, follow the links to our Knowledge Base. Review the Table of Contents and search for the name and/or part number of this product.
 
For automated notification of changes to information contained in our Knowledge Base please register as a Priority Response member and subscribe to our Priority Response Notification Service.